Fuel Containment


[Click to edit the title]

Polyurea Coatings & Linings Usage

  • Primary & Secondary Containment
  • Almost instant gel time leads to minimal down time, decreasing cost
  • Elongation properties allow for movement of the metal, concrete or earthen substrate without failure of monolithic barrier.
  • No VOC's or catalysts
  • Desired thickness in one application, decreasing downtime and cost
  • Not effected by humidity or moisture eliminating costly tenting and dehumidifying of tanks
  • Can be put back in service within 1 hour of completion of spraying decreasing downtime and costs
  • Resists thermal shock
  • Adheres to concrete and metal
  • .5% shrink factor allows a shrink wrap effect around pipes entering and leaving containment
  • Can be sprayed to self-supportive thickness
  • Ease of repair if surface is altered while maintaining monolithic seamless character
  • Can be top coated to resist acidic and caustic chemical
  • Walk areas can be finished with a slip resistant texture and hi-lighted with safety yellow lines
  • Polyureas properties allow for an extended warranty of up to 10 years
  • DEP approved for primary containment
  • DEP approved for secondary containment.
  • NSF approved for potable H2O
  • Advantages over epoxies- and urethanes

HAVE IT DONE ONCE - HAVE IT DONE RIGHT - SAVE TIME, MONEY AND HEADACHES


Water and Wastewater Industry


  • Protecting manholes, lift stations and related structures against the affects of hydrogen sulfide
  • Internal coating of underground piping and water mains with the use of an internal pipe sprayer
  • Holding pond linings over concrete or with a geo textile over earthen substrate
  • NSF approved for potable H2O
  • Holding tanks
  • Clarifiers
  • Preservation of sand bag embankments from wash out
  • Lining of irrigation ditches, troughs and fumes
  • Cooling tower liner
  • Lining of vacuum trucks

Roofing Industry


  • Roof coating for monolithic domes
  • Water proofing
  • Over gravel roofing
  • Over metal roofs, sheds
  • Over foam insulation
  • Rooftop parking decks
  • To encapsulate asbestos shingles

Chemical - Fertilizer Industry


  • Primary and secondary containment
  • Lining of silos and tanks both internal and external
  • Rail cars

Encapsulation Of


  • Rusting metal
  • Bridges
  • Metal tanks
  • Asbestos
  • Hazardous materials
  • External ship hulls
  • Internal ship holds
  • Barge bottoms

Containment - Petroleum Industry


  • Primary containment over concrete or metal
  • Secondary containment over concrete or metal
  • Secondary containment over earthen dikes with geo textile
  • Holding tank lining (metal)
  • Pipe coating (internal & external)
  • Tanker truck fueling pads & drain pits
  • Rust encapsulation
  • Lining tanks of transport vehicles

Other Uses


  • Aircraft carrier decks, stairs, passageways
  • Truck bed liners
  • Over polystyrene for floating docks
  • Coating of sea walls
  • Custom H2O fountains
  • Cold rooms
  • Mechanical rooms
  • Clean rooms

polyurea - autec - secondary containment

 

 

 

 

Polyurea at the Venetian

 

 

 

 

Polyurea at Patrick Air Force Base

 

 

 

 

polyurea in Key West

 

 

 

 

Key Polyurea Roof Coating

 

 

 

 

Polyurea at the Lee County Clarifier

 

 

 

 

Polyurea for Acid Containment

 

 

 

 

Polyurea for Cross Creek Utilities